Ronald Bradford
MySQL Expert

MySQL Expert Ronald Bradford shares valuable input in MySQL Performance Tuning, MySQL Scalability and general MySQL Help from his two decades of working with MySQL, Oracle, Ingres and development technologies.

Archive for the ‘Ubuntu’ Category

Installing Ubuntu Desktop 10.04 with LVM

Saturday, March 27th, 2010

With a new quad core desktop with 8GB RAM & 1TB HDD I wanted to install the Ubuntu desktop version using LVM. This is not possible with the “Desktop CD”. You need to use the “alternative CD” which will easily allow you to configure LVM via a text/cursors installation and also give you a deskop GNOME environment. The “Server CD” also gives you LVM options, but no GUI.

While there are complicated instructions on how to configure/setup LVM with various versions of Ubuntu, all you need with Ubuntu 10.04 is the right CD.

While installing I also read up on two tips that I found of benefit.

  • During installation of the base system, package unpacking and setup messages are redirected to tty4. You can access this terminal by pressing Left Alt+F4; get back to the main installer process with Left Alt+F1.
  • You can get a terminal window easily during installation by switching to the second virtual console by pressing Left Alt+F2

Installation was rather seamless, the only annoyance the cursors interface not displaying clearly on my Dell 2407WFP monitor during the installation process. Monitor works fine with installed GUI at 1920×1200.

Posted in Open Source, Ubuntu | 3 Comments »

Getting wireless working on Ubuntu Macbook

Wednesday, July 15th, 2009

I run Ubuntu 9.04 Januty on my Macbook. Previously installing Ubuntu 8.10, wireless worked automatically, for 9.04 it did not.

This is what I did to fix it.

  1. Verify your Macbook is seeing the Broadcom controller. See below for the lspci command, and expected output.
  2. Goto System -> Administration -> Hardware Drivers. The Broadcom STA wireless driver is activated, deactivate it.
  3. Add to /etc/modules a line with wl
  4. Reboot
  5. Goto System -> Administration -> Hardware Drivers. Activate the Broadcom STA wireless driver.
  6. Reboot
  7. Wireless now operational.
$ lspci
...
02:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. Marvell Yukon 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
04:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)

For reference, modprobe wl does not return any output in my environment, yet wireless works fine.

References:

Tags: , , , , , ,
Posted in Linux, Open Source, Professional, Ubuntu | No Comments »

multi-threaded memcached

Thursday, June 11th, 2009

I discovered while compiling Wafflegrid today that by default, the Ubuntu binaries for memcached are not-multithreaded.

Following the installation of memcached from apt-get and libmemcached I ran memslap for:

$ memslap -s localhost
    Threads connecting to servers 1
    Took 1.633 seconds to load data

$ memstat -s localhost
Listing 1 Server

Server: localhost (11211)
     pid: 23868
     uptime: 54
     time: 1244575816
     version: 1.2.2
     pointer_size: 32
     rusage_user: 0.90000
     rusage_system: 0.120000
     curr_items: 10000
     total_items: 10000
     bytes: 5430000
     curr_connections: 1
     total_connections: 3
     connection_structures: 2
     cmd_get: 0
     cmd_set: 10000
     get_hits: 0
     get_misses: 0
     evictions: 0
     bytes_read: 5430000
     bytes_written: 5430000
     limit_maxbytes: 0
     threads: 1

By installed the Latest RC 1.4.0 we see.

memslap -s localhost
    Threads connecting to servers 1
    Took 0.866 seconds to load data

memstat -s localhost

Listing 1 Server

Server: localhost (11211)
     pid: 8651
     uptime: 375
     time: 1244577237
     version: 1.4.0-rc1
     pointer_size: 32
     rusage_user: 0.110000
     rusage_system: 0.130000
     curr_items: 10000
     total_items: 10000
     bytes: 5510000
     curr_connections: 5
     total_connections: 8
     connection_structures: 6
     cmd_get: 0
     cmd_set: 10000
     get_hits: 0
     get_misses: 0
     evictions: 0
     bytes_read: 5510000
     bytes_written: 5510000
     limit_maxbytes: 0
     threads: 5

Thanks Matt for pointing that one out.

Posted in Databases, General, Linux, MySQL, Open Source, Professional, Ubuntu, Wafflegrid, memcached | 4 Comments »

VirtualBox, compiling Part 2

Monday, August 18th, 2008

So I managed to find all dependencies after some trial and error for compiling VirtualBox 1.6.4 under Ubuntu 8.0.4, then finding the Linux build instructions to confirm.

It was not successful however in building, throwing the following error:

kBuild: Compiling dyngen - dyngen.c
kBuild: Linking dyngen
kmk[2]: Leaving directory `/usr/local/VirtualBox-1.6.4/src/recompiler'
kmk[2]: Entering directory `/usr/local/VirtualBox-1.6.4/src/apps'
kmk[2]: pass_bldprogs: No such file or directory
kmk[2]: *** No rule to make target `pass_bldprogs'. Stop.
kmk[2]: Leaving directory `/usr/local/VirtualBox-1.6.4/src/apps'
kmk[1]: *** [pass_bldprogs_before] Error 2
kmk[1]: Leaving directory `/usr/local/Virtu

More searching, I needed to add two more files manually. Read More Here.

A long wait, compiling for 20+ minutes, and a necessary reboot as upgraded images threw another error, I got 1.6.4 running, and able to boot Fedora Core 9 image created under 1.5.6

But the real test, and the need for this version was to install Intrepid.

This also failed with a Kernel panic during boot. More info to see this reported as a Ubuntu Bug and Virtual Box Bug.

More work still needed.

Tags: , , ,
Posted in General, Linux, Open Source, Sun, Ubuntu, Web, virtual box | No Comments »